SMV Series

SMV Series Frequency Inverters

The performance and flexibility make the SMVector an attractive solution for a broad range of AC Motor applications and with several communications protocols available, networking drives and components into a system solution can be done now or in the future.

The SMVector Series can be used with 3-phase AC induction motors and is available in NEMA 1 (IP31) , NEMA 4X (IP65) and NEMA 4X (IP65) with an integral disconnect switch. Filtered input versions of the SMV are available in NEMA 4X (IP65) models for compliance with the CE EMC directive.
MC Series
MC1000 and MC3000 Frequency Inverters
Enclosed V/f Control (Constant Torque)
The MC Series drives are built in rugged steel enclosures that hold up to daily life on the factory floor. The easy to read 16 character LCD display above the drive keypad allows for easy and intuitive set up as well as daily operation.

- > 1/4 through 150HP (0.18 - 110kW)
- >Input voltages from 120V single phase (with voltage doubler) to 590VAC
- > NEMA Type 1, 12, 4 and 4X Enclosures

This constant horsepower drive can be set up for simple applications requiring ramped start, ramped stop and speed control to demanding applications that require PID set-point control and many other functions. The MC Series consists of the MC1000 and MC3000 models; most applications will use the MC1000 with a keypad that includes Start, Stop, up, down, forward/reverse, Program/Run, Auto/Manual and Enter buttons. For non-reversing applications that require independent switching of start and stop from local to remote and speed control from auto to manual, the MC3000 series keypad replaces the forward/reverse button with Local/Remote.

SCF Series
SCF Series Frequency Inverters
This truly flexible sub-micro drive gives you the compact size you need for your panel layout while delivering on the functions and features your process demands. The SCF Series can be used with 3-phase AC induction motors rated from 1/4 HP up to 30HP (0.18 - 22 kW) on voltages from 120V single-phase to 590 V three-phase.

With 18 isolated terminals (5 logic inputs, 2 logic outputs, 2 analog inputs and 2 analog outputs plus RS485 Modbus Serial Communication), the SCF Series is ideal for motion control applications from the simple to the complex.

Home | Contact Us | Terms and Conditions

© Copyright 2014 NE Drives & Controls, 115 Water St. Southington, CT 06489